Changing the door hinging
82
The appliance is supplied with left-hand
hinging. If right-hand hinging is
required, the hinges must be changed.
Please note that the hinging must not
be changed if this appliance is going to
be installed side by side with another
refrigeration appliance.
Always change the door hinging
with the assistance of another
person.
If a door seal is damaged or has
come out of the groove, the door will
not close properly and cooling
performance will be reduced.
Condensate will build up in the
interior and this can cause a build-up
of ice.
Do not damage the door seals and
ensure that they do not come out of
their groove.
Preparing to change the door hinging
To change the door hinging, you will
need the following tools:
Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.
Do
not
change the hinging if this
appliance is going to be installed
side by side with another
refrigeration appliance. The other
refrigeration appliance or freezer
must be installed to the right of this
refrigerator.
Removing the door handles
When you pull the door handle
, the
sidebar
slides back.
Pull the sidebar
firmly to the back
out of the guides on the mounting
plate.
Now loosen the four screws (TX15) in
the mounting plate and remove the
handle.
Remove the cover caps from the
opposite side, and fit them into the
empty holes.
Содержание KFN 14827 SDE ed/cs-2
Страница 94: ......
Страница 96: ...M Nr 09 574 230 05 en AU NZ KFN 14827 SDE ed cs 2 ...