Changing the door hinging
86
Push the panel
toward the
appliance and leave it hanging there
between the door and appliance for
the time being.
Place the safety device
(supplied
with the refrigerator) on the soft-close
mechanism
so that it engages.
The safety device prevents the hinge
from snapping shut.
Do not remove the red safety device
until instructed to do so.
Use a flat-headed screwdriver to
carefully remove the cover
from
the side.
With the help of another person, tip
the appliance back slightly.
Push the pin
up and out from
below.
Now the soft-close mechanism and the
appliance are no longer connected.
Remove the panel
.
Slide the soft-close mechanism
bracket
as far as it will go towards
the handle side of the door, and undo
the screws
on the soft-close
mechanism.
Using a flat-headed screwdriver, slide
the soft-close door mechanism
towards the handle side of the door,
and lever it out at the side.
Put the soft-close mechanism aside.
Содержание KFN 14827 SDE ed/cs-2
Страница 94: ......
Страница 96: ...M Nr 09 574 230 05 en AU NZ KFN 14827 SDE ed cs 2 ...