manualshive.com logo in svg

Miele KFN 14827 SDE ed/cs-2, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFN 14827 SDE ed/cs-2 Скачать руководство пользователя страница 14

How to save energy

14

Normal energy
consumption

Increased energy
consumption

Installation/
Maintenance

In a ventilated room.

In an enclosed, unventilated
room.

Protected from direct
sunlight.

In direct sunlight.

Not situated near a heat
source (radiator, oven).

Situated near a heat source
(radiator, oven).

Where the ideal ambient
room temperature is approx.
20 °C.

Where the ambient room
temperature is above 25 °C.

Where the ventilation gaps
are not covered and kept
free of dust.

Where the ventilation gaps
are covered or dusty.

Dust the compressor and
metal grille (heat exchanger)
at the back of the appliance
at least once a year.

Dust build-up on the
compressor and metal grille
(heat exchanger).

Temperature
settings

PerfectFresh zone just above
0 °C

The lower the temperature
set for the appliance, the
higher the energy
consumption.

Freezer section -18 °C

Содержание KFN 14827 SDE ed/cs-2

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды