manualshive.com logo in svg

Miele KFN 14827 SDE ed/cs-2, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFN 14827 SDE ed/cs-2 Скачать руководство пользователя страница 75

Installation in a side by side combination

75

Installation

This refrigerator with freezer section
must be installed to the left of another
refrigeration appliance or freezer
(when viewed from the front). The
side wall heating in the inner wall of
this refrigeration appliance is
designed to prevent the build-up of
condensation between the two
appliances.

Place the two appliances as close as
possible to their final position so that
they can be aligned for any
unevenness in the floor. The backs of
the appliances must be kept
accessible to complete the
installation.

Before installing peel off any
protective foil from the appliance
casing.

Notes on moving side by side appliance
combinations:

Push the combination alternately from
the left and right corners. Whilst
doing so grasp the outside front
corners. Do not, under any
circumstances, use your knees to
push against the sides or the
appliance doors.

Once the side by side combination is
directly in front of the niche, push it
carefully into position.

If it is necessary to pull the
combination back out of the niche,
hold it by the lower third and pull it
straight out.

Содержание KFN 14827 SDE ed/cs-2

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды