![background image](http://html.mh-extra.com/html/miele/kfn-14827-sde-ed-cs-2/kfn-14827-sde-ed-cs-2_operating-and-installation-instructions_236539025.webp)
The correct temperature
25
– Leaving the finger on the sensor
changes the temperature
continuously. Once the highest or
lowest temperature value has been
reached the sensor
or
,
respectively, will go out.
Approximately 5 seconds after the last
time a sensor has been touched, the
display automatically reverts to showing
the
actual mean
temperature inside the
freezer section.
When you have adjusted the
temperature, wait for
approx. 6 hours if
the appliance is not very full
and for
approx. 24 hours if the appliance is
full
before checking the temperature
display. It will take this long for the
appliance to give an accurate reading.
If, after this time, the temperature is still
too high or too low, adjust it again.
Temperature range
The temperature in the freezer section
can be set from -14 °C to -28 °C.
The ambient temperature in the room
and the installation location can
affect the time it takes for the
appliance to reach the lowest
temperature.
If the ambient temperature is too
high, the appliance may not reach
the lowest temperature.
Temperature display
During normal operation the
temperature displays on the control
panel show the temperature in the
middle of the PerfectFresh zone and
the temperature in the warmest part of
the freezer section.
Содержание KFN 14827 SDE ed/cs-2
Страница 94: ......
Страница 96: ...M Nr 09 574 230 05 en AU NZ KFN 14827 SDE ed cs 2 ...