manualshive.com logo in svg

Miele KFN 14827 SDE ed/cs-2, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFN 14827 SDE ed/cs-2 Скачать руководство пользователя страница 69

Installation

69

Climate range

The appliance is designed for use within
a certain climate range (ambient
temperatures) and should not be used
outside this range. The climate range of
the appliance is stated on the data plate
inside the appliance.

Climate range

Ambient room

temperature

SN

+10 to +32 °C

N

+16 to +32 °C

ST

+16 to +38 °C

T

+16 to +43 °C

Operating in a room which is too cold
will result in the compressor switching
off for too long, causing the internal
temperature in the appliance to rise with
the risk of food deteriorating and going
off.

Ventilation

Air at the back of the appliance gets
warm.

To ensure effective ventilation

the ventilation gaps must not be
covered or blocked. They must also
be cleaned on a regular basis to
remove dust.

Fitting the supplied wall
spacers

The wall spacers supplied must be
used in order to achieve the stated
energy consumption values and to
prevent the build-up of condensation
at high ambient temperatures.
Appliance depth is increased by
approx. 35 mm with the wall spacers
fitted. If the wall spacers are not used
the functionality of the appliance is not
affected. However, energy
consumption is slightly increased with
less distance between the appliance
and the wall.

Fit the wall spacers onto the back of
the appliance on the top left and
right.

Содержание KFN 14827 SDE ed/cs-2

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды