manualshive.com logo in svg

Miele KFN 14827 SDE ed/cs-2, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFN 14827 SDE ed/cs-2 Скачать руководство пользователя страница 56

Problem solving guide

56

Messages in the display

Message

Possible cause and remedy



 appears in the

display. The machine
does not get cold, but
the machine controls
are working.

Demo mode

 is activated. In this mode, the appliance

can be presented in a showroom without the cooling
system being switched on. Do not activate this setting
for domestic use.

Call Miele.

Bars light up in the
temperature display.

Only temperatures within the range of the appliance
temperature display will be displayed.

Check the temperature in the display about 6
hours after switching the appliance on.

 lights up in the

display and the
appliance cannot be
operated.

The 

safety lock

 has been activated.

Switch the safety lock off (see "Further settings -
Switching the safety lock on/off").

The alarm off sensor 

lights up red in the
display, the symbol for
the section with the
open door flashes, and
a warning tone sounds.

The 

door alarm

 has been activated (see

"Temperature and door alarm").

Touch the alarm off sensor 

 in the display.

The alarm message is confirmed and the warning
tone stops.

Close the relevant appliance door.

The warning tone will stop.

Содержание KFN 14827 SDE ed/cs-2

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды