manualshive.com logo in svg

Miele KFN 14827 SDE ed/cs-2, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFN 14827 SDE ed/cs-2 Скачать руководство пользователя страница 9

Warning and Safety instructions

9

 

Unauthorised installation, maintenance and repairs, or a faulty

mains water connection can result in considerable danger for the
user.
Installation, maintenance and repairs, installation work on the mains
water connection, and all repairs on the ice/water outlet must only
be carried out by a Miele authorised technician.

 

The ice cube maker must only be connected to a cold water

supply.

 

The manufacturer's warranty will be invalidated if the appliance is

not repaired by a Miele approved service technician.

 

Faulty components must only be replaced by genuine Miele spare

parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.

 

Miele cannot be held liable for damage caused by a faulty water

connection.

 

In areas which may be subject to infestation by cockroaches or

other vermin, pay particular attention to keeping the appliance and
its surroundings clean at all times. Any damage caused by
cockroaches or other vermin will not be covered by the warranty.

Correct use

 

The appliance is designed for use within a certain climate range

(ambient temperatures), and should not be used outside this range.
The climate range for your appliance is stated on the data plate
inside the appliance. Installing it in a room with too low an ambient
temperature, e.g. a garage, will lead to the appliance switching off
for longer periods, with the result that it cannot maintain the required
temperature.

 

To ensure proper air flow in and out of the appliance, the

ventilation gaps in the appliance and built-in structure must not be
covered or blocked in any way. This would also increase the energy
consumption and could cause damage to the appliance.

Содержание KFN 14827 SDE ed/cs-2

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды