![background image](http://html.mh-extra.com/html/miele/kfn-14827-sde-ed-cs-2/kfn-14827-sde-ed-cs-2_operating-and-installation-instructions_236539079.webp)
Installation in a side by side combination
79
Press the long piece of stainless steel
trim
into the gap at the front
between the two appliances. Ensure
that it is seated against the
connecting bracket
.
Useful tip:
Press both ridges along the
entire length of the trim together. This
simplifies the process of fitting the trim
into the gap.
Carefully work the stainless steel trim
into the gap. Use a soft cloth to do
this to avoid denting the trim.
Remove the protective foil from the
stainless steel trim.
Press the top edge of the short trim
into the gap. When doing so make
sure that the front edge of the trim is
flush with the edge of the connecting
plate
.
Clip the cover
between the two
control panels. Ensure that the
outside edges of the cover are flush
with the control panels. The cover is
extendable for this purpose.
Содержание KFN 14827 SDE ed/cs-2
Страница 94: ......
Страница 96: ...M Nr 09 574 230 05 en AU NZ KFN 14827 SDE ed cs 2 ...