Problem solving guide
132
Problem
Cause and remedy
System lock
appears in
the display when the
oven is switched on.
The system lock is activated.
It can be released for a programme to be run by
touching the symbol for at least 6 seconds.
The system lock can be permanently deactivated
(see "Settings – System lock").
The oven does not heat
up.
Demo mode has been activated.
The oven can be operated but does not heat up.
Deactivate demo mode. See "Settings -
Showroom programme".
Power cut - process
cancelled
appears in the
display.
There has been a power cut which has caused a
current process to stop.
Switch the oven off and then back on again.
Start the programme again.
12:00
has appeared in
the display.
The power supply was interrupted for longer than 200
hours.
Reset the time and date.
Maximum operating duration
reached
appears in the
display.
The oven has been operating for an unusually long
time and this has activated the safety switch-off
function.
Confirm with OK. Touch
to delete the message
Process finished
.
The oven is now ready to use.
Fault XX
appears in
the display.
There is a problem that you cannot resolve.
Call the Miele Service Department.
You cannot set the core
temperature.
The food probe is not recognised by the oven.
Check that the food probe is engaged in the
socket properly.
If the oven still does not recognise the food probe it
must be faulty. A replacement food probe can be
ordered from Miele or from your Miele dealer.
If the door is opened
whilst using Microwave
solo
, the oven stops
making a noise.
This is not a fault. If the door is opened while
Microwave solo
is being used, the door contact
switch will turn off the microwave and switch the
cooling fan to a lower speed.
Содержание H6500BM
Страница 144: ......
Страница 145: ......
Страница 146: ......
Страница 148: ...M Nr 10 230 640 01 en GB H6500BM H6600BM ...