–
24
–
Set the dryer upright using packing material or a
protective surface that ensures the brackets do
not damage the
fl
oor.
Place and level the washer in the approximate
location. (Refer to washer installation
instructions for details.)
6.
7.
Caution:
Protect the washer control panel with
cardboard or other protection to prevent damage
caused by contact with the dryer brackets.
Lift the dryer high enough to clear the washer
control panel and place the dryer on top of the
washer.
Align the holes in the brackets with the holes
in the back of the washer. Attach the brackets
to the washer using 4 (#
4.2*11mm
.) Phillips-
head screws.
8
.
9
.
WARNING!
Do not push on the dryer after it is stacked on the
washer. Pushing on the dryer may result in pinched
fi
ngers.
Caution:
Use felt pads or other sliding device to
assist moving and to protect
fl
ooring.
Note:
Ensure that the washer and the dryer are
in compliance with their respective installation
instructions.
Carefully slide or walk the stacked washer and
dryer into place.
10.
Place hands here
Place hands here
Содержание MFH180-G1302DS F01E-EU
Страница 28: ... 28 Dispenser Drawer Tub Drive Pulley Belt Motor Component Locator Views Con t ...
Страница 29: ... 29 Inverter Board Control and Inverter Board Connections Control Board ...
Страница 59: ... 62 Washer MFH210 G1301DS F01E US MFH210 G1301DSF01E US13 MFH210 G1301DSF01E S US13 MLH52S7AWW MLH52S7AGS ...