Midea MFH180-G1302DS F01E-EU, Техническое обслуживание руководство

Страница: 11 / 62

- 1 1 -
DELAY You can delay the start
of a wash cycle for up to
24 hours. Press the
Delay
Wash button to choose
the amount of time you
want to delay the start of
the wash cycle. Once the
desired time is reached,
press the button. The
machine will count down
and start automatically at
the correct time.
NOTE: If you forget to fully
close the door, a remainder
signal will beep reminding
you to do so.
NOTE: If you open the door
when the delay is counting
down, the machine will
enter the pause state.
You must close the door
and press
again in order to restart
the countdown.
Display
Displays the approximate
time remaining until the
end of the cycle.
NOTE: The cycle time
is affected by the water
pressure in your home and
the balance of the load
in the washer. You may
see the time remaining
on the display increase to
accommodate a slower
spin speed to handle
unbalanced loads.
B A
C D
Cycle status is also
displayed and certain
features such as Delay
Wash or Steam are shown
indicating they have been
selected.
Press to start a wash
cycle. If the washer is
running,pressing it once
will pause the washer.
Press again to restart the
wash cycle.
If you want add a
garment,please press the
The washer will unlock the
door. Press again to restart
the cycle.
NOTE: In some cycles the
washer will drain first,then
unlock the door when it is
paused.
NOTE: The washer
performs automatic system
checks after pressing the
or less. You may hear the
door lock and unlock before
water flows
,
this is normal.
Wash Time Delay Time
End Error
A
Display
B
Remain-Delay
C
Child Lock
D
Door Lock
button
MFH180-G1302DS/F01E- E U
button.
button.