Output Menu
MS-850 Raster Scanner User’s Manual
2-37
2–Menu C
o
n
fig
.
Postamble
Default:
^
M^J.
Corresponds to <CR><LF><NUL><NUL> (carriage
return/line feed/null/null) displayed in the menu.
Options: Up to four user defined ASCII character, including control characters. Con-
trol characters entered on the command line are displayed in the menu as
mnemonic characters.
Allows you to define a one to four character data string that can be added to the end
of the decoded data. For example, defining the Postamble as a carriage return and
line feed would result in the display of each decoded message on its own line.
Partial Output
Status
Default:
Disabled
Options:
Disabled, Enabled
When enabled, allows you to pre-select portions of labels to be transmitted by the scan-
ner.
In multilabel mode, partial output is performed on each separate label. For example, if
Start Position is set to 3 and Partial Length is set to 5, the following labels are trans-
mitted as follows:
1234567890 as “34567”
1234 as“34”
1234,abcde as “34,cde” (two labels with separator)
12 as ““
Start Position
Default:
1
Options:
1 to 2710
Allows you to determine the first character from the beginning of a label to transmit.
Partial Length
Default:
63
Options: 1 to 2710
Allows you to determine the number of characters to be transmitted.
