Microscan MS-850 Скачать руководство пользователя страница 60

Страница: 60 / 144

Chapter 2

Menu Configuration

2-36

MS-850 Raster Scanner User’s Manual

2–Menu Conf

downloaded into memory.

Note

: To activate on a Good Read, set Output On to Match and disable Match Code Type.

Match (or Good Read)

Activates output pins when the decoded label matches the master label. To send the

pulse on a good read, disable Match Code Type.

Mismatch

Activates output pins when the label’s data does not match that of the master label.

Mismatch or Noread

Activates output pins when the label's data does not match that of the master label or
the label is not decoded before the end of the read cycle.

Noread

Activates output pins when the label’s data is not decoded before the end of the read
cycle.

Preamble (enable/disable)

Default:

Disabled

Options:

Disabled, Enabled (within any protocol)

Allows you to enable or disable the preamble character(s).

Preamble

Default:

(and a null). Corresponds to <CR><NUL><NUL><NUL> (carriage

return/null/null/null) displayed in the menu.

Options: Up to four user defined ASCII characters, including control characters. Con-

trol characters entered on the command line are displayed in the menu as
mnemonic characters.

Allows you to define a one to four character data string that can be added to the front
of the decoded data.

Postamble (enable/disable)

Default:

Enabled

Options:

Enabled, Disabled (within any protocol)

Allows you to enable or disable the Postamble character(s).

Содержание MS-850

















































































































































Результаты поиска

Содержание MS-850

Отзывы:

Похожие инструкции для MS-850

Бренды по названию

Популярные бренды

Microscan MS-850, Руководство пользователя

Результаты поиска

Содержание MS-850

Отзывы:

Похожие инструкции для MS-850

Бренды по названию

Популярные бренды