MICRO-EPSILON reflectCONTROL RCS, Инструкция по эксплуатации

Страница: 109 / 134

Description of the “Evaluation” View
Page 109
F “Start measurement” button: Click on this button to perform a measuring operation, calculate
the measurement results and display the point cloud and measurement results of the currently
selected measuring program in the 3D-View.
G Results display: The measurement results of the currently selected measuring program are dis-
played. Here, you can select which measured values are to be made available later for calcula-
tion, OK/nOK assessment, logging and output (see Chapter
3.16.8 ).
H Status bar: Status and error messages are displayed in the status bar (see Chapter 8.1 ).
1 Distance type: Select the type of distance to be calculated:
-
Distance between two points
-
Distance between point and plane
-
Distance between point and straight line
Different objects can be used for each individual input type:
-
Point:

Point: The relevant point is used for the distance calculation. The following measuring
programs produce points:
 “Center of Gravity” measuring program (see Chap. 6.1.1 )

“Extreme Point” measuring program (see Chap. 6.1.2 )

“Plane Fit” measuring program (see Chap. 6.1.3 )
 “Object Intersection” measuring program (see Chap. 6.2.3 )

“Perpendicular Point” measuring program (see Chap. 6.2.4 )
 Sphere: The center point of the sphere is used for the distance calculation. The following
measuring program produces a sphere:

“Sphere Fit” measuring program (see Chap. 6.1.4 )
 Circle: The center point of the circle is used for the distance calculation. The following
measuring programs produce circles:

“Circular Hole” measuring program (see Chap. 6.1.6 )
 “Circular Pad” measuring program (see Chap. 6.1.7 )
-
Straight line:
 Straight line: The relevant straight line is used for the distance calculation. The following
measuring programs produce straight lines:

“Object Intersection” measuring program (see Chap. 6.2.3 )
 “Edge” measuring program (see Chap. 6.1.9 )
 Cylinder: The longitudinal axis of the cylinder is used for the distance calculation. The
following measuring program produces a cylinder:

“Cylinder Fit” measuring program (see Chap. 6.1.5 )
-
Plane:
 Plane: The relevant plane is used for the distance calculation. The following measuring
program produces a plane:

“Plane Fit” measuring program (see Chap. 6.1.3 )
2 Input data: Use this selection field to select the input objects for the program (see also Chap.
3.16.3 ). The list of available objects varies depending on the type of distance.
3 Parameters: The measuring program offers other parameters depending on the type of distance
and selected input objects:
-
Distance from surface: When you use spheres and cylinders, you can choose whether the dis-
tance from the center point or longitudinal axis or from the surface of the relevant object is cal-
culated.
-
Signed distance: You can choose whether to output the signed distance or the absolute dis-
tance value. This parameter is available for the following distance types:
 Distance between two points when a point and sphere are used and the “Distance from
surface” option is activated (point inside/outside sphere)

Distance between point and plane (point above/below the plane)

Distance between point and line when a point and cylinder are used and the “Distance
from surface” option is activated (point inside/outside cylinder)