MICRO-EPSILON reflectCONTROL RCS, Инструкция по эксплуатации

Страница: 7 / 134

Introduction
Page 7
1.5 Functions of the Measuring Programs
This list of functions should only be used as a brief overview. The measuring programs are split into three
groups. A detail description of all measuring programs can be found in Chapter
5.1 , 6.1 and 6.2 .
- Data preprocessing: Programs for selection, filtering, transformation and alignment of point clouds
can be found in this group.

Calibrate Position: Adjusting the mounting position of the sensor using a static rotation and
translation.

Select Points: Select 3D points by using regions of interest and discard the remaining points.

Bounding Box Alignment: Align a point cloud by means of a bounding box.

Plane Alignment: Align a point cloud by means of a plane.

Contour Alignment: Align a point cloud by means of a contour.

Trend Removal: Remove a trend of a point cloud.

Average Filter: Filter a point cloud by using an average filter.

Median Filter: Filter a point cloud by using a median filter.

Low Pass Filter: Filter a point cloud by using a low pass filter.

High Pass Filter: Compute the difference of a point cloud which has been filtered with a low
pass filter from the original point cloud.

Closing: Fill gaps of a point cloud by using a dilatation and an erosion filter.

Erosion: Filter a point cloud by using an erosion filter.
- Find objects: Programs for fitting geometric objects can be found in this group.

Center of Gravity: Calculate the center of gravity of 3D points.

Extreme Point: Calculate an extreme point of 3D points.

Plane Fit: Calculate a fitting plane through 3D points.

Sphere Fit: Calculate a fitting sphere through 3D points.

Cylinder Fit: Calculate a fitting cylinder through 3D points.

Circular Hole: Measure a circular hole in a point cloud.

Circular Pad: Measure a circular pad in a point cloud.

Rectangular Pad: Measure a rectangular pad in a point cloud.

Edge: Measure a straight edge in a point cloud.
- Combine Objects: Programs for combing previously found objects.

Distance: Calculate the distance between two objects.

Angle: Calculate the angle difference between two objects.

Object intersection: Calculate a new geometric object by intersection of two objects.

Perpendicular Point: Calculate a point by an orthogonal projection from a point to a plane or
a line.