MICRO-EPSILON 4350127.256, Руководство по эксплуатации

Страница: 17 / 173

Page 17
Overview of Mechanical Components
thicknessCONTROL MTS 8202.LLT / 4350127.256
3.7 Human-Machine Interface
The components shown in the following sections are necessary for operating the system.
1 2 3 4
1 On/Off switch
2 PC active / LED is green
3 Area stop
4 Reset Area stop
Fig. 16 Operating tools on the measuring machine/switching cabinet.
3.7.1 Signal Lamp
To visualize the operating states over long distances, the system features a signal lamp ,
see Fig. 17 (1).
1
1 Signal lamp
Fig. 17 Signal lamp
Initializing: flashing green Ready: constant green
Measuring: constant yellow Calibrating: flashing yellow
Outside tolerance: red Constant error: flashing red
3.7.2 Emergency Stop
The measuring machine a AREA stop button. The measuring system uses the EMER-
GENCY stop signal from the production line. If an EMERGENCY stop signal is detected,
the measuring system stops the thickness measurement. If the emergency stop is can-
celed by the production control, the sensor system returns to the rest position.
3.7.3 Licence Key in the switching cabinet