Micom P631, Техническое руководство

Страница: 369 / 638

Parameter Address
Default Min Max Unit Logic Diagram
Current transformer
supervision
CTS: Function group CTS 056 077
0: Without
[spacer]
Cancelling function group CTS or including it in the configuration. If the function
group is cancelled from the configuration, then all associated settings and
signals are hidden.
Note: The new processor board with a DSP coprocessor is an unconditional
hardware requirement for this function group!
Parameter Address
Default Min Max Unit Logic Diagram
Measuring-circuit
monitoring
MCM_1: Function group MCM_1 056 073
0: Without
[spacer]
MCM_2: Function group MCM_2 056 074
0: Without
[spacer]
Cancelling function groups MCM_x or including them in the configuration. If a
function group is cancelled, then all associated settings and signals are hidden,
with the exception of this setting.
Parameter Address
Default Min Max Unit Logic Diagram
Circuit breaker
failure protection
CBF_1: Function group CBF_1 056 007
0: Without
[spacer]
CBF_2: Function group CBF_2 056 082
0: Without
[spacer]
Cancelling function group CBF_x or including it in the configuration. If the
function group is cancelled from the configuration, then all associated settings
and signals are hidden, with the exception of this setting.
Parameter Address
Default Min Max Unit Logic Diagram
Limit value
monitoring
LIMIT: Function group LIMIT 056 025
0: Without
[spacer] Cancelling function group LIMIT or including it in the configuration. If the
function group is cancelled from the configuration, then all associated settings
and signals are hidden, with the exception of this setting.
7 Settings
P631
P631/EN M/R-11-C // P631-310-650 7-69