stb-ava.pdf S
t. 13/10/14 Printed in Germany
Fig. 37.3
Fig. 37.2
Fig. 37.1
39
84
31.5
39
84
87
31.5
Twin channel 80/22
Inside corner with cross brace STB and STB 450
Single-sided walls with corners
can be formed using the cross
brace STB. The cross brace must
be attached to the multi-function
profiles of the wall formwork
using flange screws 18. Two
support frames are required for
each corner. For detailed dimen-
sions of the anchor positions see
Figures 37.1 and 37.2. For the
anchoring of support frames see
pages STB-18 to STB-30.
A maximum formwork height of
6.00 m is possible when using
the cross brace STB with the
STB 450.
For details of the use of the cross
brace in conjunction with StarTec
and Mammut formwork refer to
the next pages.
Attention
Æ
The dimensions for the an-
chor positions must be observed.
During assembly, the inside
corner and the “corner” panel
must be absolutely flush.
Æ
Refer the separate STB load
charts for the permissible loads
as a function of pouring height
and fresh-concrete pressure.
Description
Ref. No.
Cross brace STB ....................
29-406-70
Flange screw 18 ....................
29-401-10
Twin channel 80/22...............
29-406-35
31.5
31.5
STB-37
Technical Instruction Manual / Status November 2019
STB
Support frame
