The STB support frames and the
brace brackets can be combined
with all MEVA wall formwork
systems as well as with special
designs.
From a structural and economic
point of view and depending
on the formwork system used,
it may be more advantageous
to use the support frame with
vertical (Fig. 5.1) or horizontal
panels (Fig. 5.2).
The support frame can be
attached to the MEVA wall form-
work panel from the frame side
with flange screw 18 (Fig. 5.3).
Alternatively, it can be attached
from the facing side using fixing
screw 35 and articulated flange
nut 15/120 or flange nut 100
(Figures 5.4 and 5.5).
Attention
Æ
When using the STB unit
vertically, the spindle must be
set to the middle position before
mounting the STB on the form-
work. This ensures that it can
be perfectly adapted to suit the
supporting surface.
Æ
Refer to the product list for
the spindle stroke.
Æ
Before pouring, ensure that
all STB spindles and additional
braces are secure and contact
the ground.
Product overview
Fig. 5.1 Support frame STB 300 with vertical panels
Fig. 5.2 Support frame STB 450 with horizontal panels
Fig. 5.4 Detail – Fixing screw on the support frame side
Fig. 5.5 Detail – Fixing screw on the facing side
Fig. 5.3 Detail – Flange screw 18, attachment on the support frame side
Spindle
STB-5
Technical Instruction Manual / Status November 2019
STB
Support frame
