Brace bracket 80
Description
Ref. No.
Brace bracket 80 ...................
29-921-35
Flange screw 12 ....................
29-900-70
The brace bracket 80 (Fig. 46.1)
enables stop ends for floor slabs
and slab edges to be created up
to a height of 80 cm.
The brace bracket 80 has an inte-
grated plastic nailing bar for the
attachment of shuttering panels
or boards.
To support standard panels, the
brace bracket 80 is clamped to
the multi-function nut of the
panel using flange screw 12
(Fig. 46.2).
Depending on the subsur-
face, the brace bracket can be
anchored to the ground using
the large holes (d = 28 mm) with
ground nails or using the small
holes (d = 12 mm) with anchor
bolts (Fig. 46.1).
Using the adjustable strut of
the brace bracket, the angle of
installation can be set steplessly
between -15° (Fig. 46.3) and
+15° (Fig. 46.4).
The brace bracket can be folded
up for transport and storage
purposes.
Fig. 46.1
Fig. 46.2
Nailing strip
Adjustable strut
Fig. 46.3
Fig. 46.4
-15°
+15°
Flange screw 12
Hole d = 28 mm (for ground
nails)
Hole d = 12 mm (for anchor bolt Fischer FAZ II 10/10 or
equivalent )
STB-46
Technical Instruction Manual / Status November 2019
STB
Support frame
