Inside corner with cross brace STB and STB 300/300 plus
Description
Ref. No.
Cross brace STB ....................
29-406-70
Flange screw 18 ....................
29-401-10
M cross stiffener 44 ..............
29-401-02
Twin channel 80/12...............
29-406-38
Single-sided walls with corners
can be formed using the cross
brace STB. The cross brace must
be attached to the multi-function
profiles of the wall formwork
using flange screws 18. Two
support frames are required for
each corner. For detailed dimen-
sions of the anchor positions see
Figures 34.1 and 34.2. For the
anchoring of support frames see
pages STB-18 to STB-30.
A maximum formwork height of
3.30 m is possible when using
the STB cross brace with the
STB 300. The STB 300 plus is
used up to a pouring height of
3.25 m and can be equipped
with height extensions for a
pouring height up to 4.50 m.
For details of the use of the cross
brace in conjunction with StarTec
and Mammut formwork refer to
the next pages.
Attention
Æ
The dimensions for the an-
chor positions must be observed.
Æ
Refer the separate STB load
charts for the permissible loads
as a function of pouring height
and fresh-concrete pressure.
Fig. 34.3
Fig. 34.2
Fig. 34.1
36
80
23
23
17
36
80
82
23
23
17
M cross stiffener 44
STB-34
Technical Instruction Manual / Status November 2019
STB
Support frame
