Metrix OX9302-BUS, Руководство пользователя

Страница: 85 / 143

Maintenance
85
10. MAINTENANCE
10.1. Warranty
This oscilloscope is guaranteed for three 3 years against defects of materials or
workmanship, in accordance with the general terms of sale.
During this period, the instrument must be repaired only by the manufacturer, which
reserves the right either to repair the instrument or to replace all or part of it. If the
equipment is sent back to the manufacturer, the customer pays for shipping to the
manufacturer.
The
warrant y does not apply in the following cases:

Inappropriate use of the equipment or use with incompatible equipment;

Modifications made to the equipment without the explicit permission of the
manufacturer’s technical staff;

Work done on the device by a person not approved by the manufacturer;

Adaptation to a particular application not anticipated in the definition of the
equipment or not indicated in the user’s manual;

Damage caused by shocks, falls, or floods.
10.2. Cleaning

Power down the instrument.

Clean it with a damp cloth and soap.

Never use abrasive substances, solvents, alcohol, or hydrocarbons.

Let dry before using again.
10.3. Repair and metrological verification
See attached safety data sheet.
Warning! In all cases, if you find a defect (screen broken, Probix socket broken, housing
defective, etc.) do not use your ScopiX, since its insulation may be impaired.
Return it without delay to customer service for repair.