Metrix OX9302-BUS, Руководство пользователя

Страница: 11 / 143

General
11
1.6.3. Auto scale
Some Probix probes have buttons, the assignments of which can be programmed:
The HX0030 probe has three directly accessible control buttons:

Button A (programmable): modification of the settings of the
channel to which it is connected

Button B (programmable): modification of the settings of the
channel to which it is connected

Button controlling the backlighting of the measurement zone.
At the time of connection, all preferred settings stored in the
accessories (assignments of buttons
A and B + colour) are
automatically reactivated. They can be modified by pressing the
zone shown opposite.
Configuring the channels and managing the sensors
The coefficients, scales, and units of the sensors and the
configurations of the channels are managed automatically.
1.6.4. Safety message
Identification
of the accessories
and management of
safety
In a kind of "plug and play" in measurement, the probes and sensors are immediately recognized
once connected. The instrument does not just identify them; it provides information about their
characteristics.
Active safety is built in, in particular, in the form of safety information and recommendations
concerning the accessory used.
1.6.5. Power supply to the accessories
The oscilloscope supplies power to the Probix accessories.

o

A B
RF compensation