Metrix OX9302-BUS, Руководство пользователя

Страница: 50 / 143

Functional Description
50
4.7.1 General parameters
Can be accessed from the
home screen by
Date/Time
Update of the date (day, month, year) and time (hour, minute, second).
The selection is made by the stylus, using the scroll bars on either side
of the parameters to be adjusted.
The clock starts when the menu is closed.
Language
Selection of the language used in the menus.
Possible options: French, English, German, Italian, Spanish, etc. (get in
touch with us to learn about any additions).
Screen
saver
The screen saver is activated after a specified time, in order to save
power and extend the life of the screen.
There are 4 options: 15min, 30min, 1h, no saver mode.
The screen is reactivated by pressing any key on the front panel.
Auto
off
The instrument is switched off after a specified time, in order to save
power.
In this case, the configuration of the instrument is saved before it is
switched off.
There are 4 options: 30min, 1h, 4h, no auto off.
Default setup: restores the factory configuration parameters. The
instrument starts up in the configuration in which it was switched off; if
the user presses "Recall", it starts up in the default (factory)
configuration.
Keys Programming the WiFi radio network
Pressing this key gives access to a list of WiFi networks available by
polling.
You can:

scan the network at any time, then select the additional page of
settings as soon as the network has been chosen

enter the fields: IP address, subnetwork mask, gateway, then
validate by "Connect". The network is then stored and WiFi
communication is active.
Ethernet programming: Automatic (DHCP) or manual setting of IP
parameters (Address, Subnet Mask and Gateway).
Assigning a link-local address in case of DHCP failure (point-to-point
link).
USB: Manual setting of IP parameters (Address, Subnet Mask and
Gateway).
Programming: cf. installation guide, RNDIS driver for Windows 7
Programming of the network printer
Enter the IP address of the printer and/or its name if there are several
printers in the network (contact your network administrator to make sure
of the presence of this type of server).
An alphanumeric keypad appears.
Exit from the setup menu