Metal-Fach SEG BIO Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 64

Metal-Fach SEG BIO Скачать руководство пользователя страница 6

METAL-FACH

Heating Technology

4

General information

(User)

The technical and operation documentation is one of the product parts, delivered together with the purchased
central heating boiler. The Operation and Technical Manual includes data concerning the construction and
assembly as well as the method of operation of boilers with a gutter burner of the SEG BIO series. Careful
reading of the manual content ensures correct and safe operation of our boiler.

ATTENTION!

The user is advised to observe all the instructions concerning the appliance contained in

this Technical and Operating Documentation, in the Warranty Conditions and in the

generally applicable legal provisions.

The boilers are delivered in an assembled condition. They are set up and fixed permanently to a pallet.

Additional protection in the form of foil packaging is used.

When transporting the boiler, it is necessary to secure it against shifting or rotation on the vehicle's load bed by

means of protective equipment, e.g. belts. The transport of boilers should be carried out in accordance with the

rules concerning the transport of materials. Loading and unloading should be carried out with lifting devices

(forklift) with a lifting capacity of more than 1000 kg.

«
...
4
5
6
7
8
...
»

Содержание SEG BIO

































































Отзывы:

Нет отзывов