Metal-Fach SEG BIO, Техническая эксплуатационная документация, Страница: 43 / 64

METAL-FACH Heating Technology
41
Cleaning and maintenance of the boiler
(User)
ATTENTION!
The boiler may only be cleaned when the appliance is switched off from the mains.
It is necessary to keep the combustion chamber and the convection ducts of the boiler clean to save fuel. It is
necessary to clean walls and shelves in the combustion chamber through the cleaning and inspection doors.
Boiler exchanger and ash collector must be cleaned regularly.
Cleaning should be done with wire brushes on extension tubes. The above activities should be done during
periodical boiler standstill, preferably every 100 hours of boiler operation. Thorough cleaning of the boiler
should be done once a month.
Instructions for disposal of the boiler at the end of its service life
(User)
Before scrapping the boiler, all electronic components must be disconnected from the boiler. They must be
disposed of in accordance with the European Directive 2002/96/EC concerning the disposal of electronic and
electrical equipment. For correct disposal, contact the manufacturer of electronic components according to the
above mentioned European Directive.
The steel parts of the boiler must be disposed of in suitable places (scrap metal collection).
ATTENTION!
Waste boiler, intended for scrapping, and its components must not be disposed of with
general waste.