Metal-Fach SEG BIO Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 64

Metal-Fach SEG BIO Скачать руководство пользователя страница 58

METAL-FACH

Heating Technology

56

Personal data provided in this form shall be processed by Jacek Kucharewicz conducting business activity under
the name Metal Fach Jacek Kucharewicz, 16-

100 Sokółka, ul. Sikorskiego 66,

NIP: 545-100-10-62, tel48

85  711  94  56  for  the  purpose  of  implementing  the  provisions  contained  in  the  warranty  conditions  -  in
accordance with the Act of 29 August 1997 on personal data protection (consolidated text: Journal of Laws 2014,
item  1182).  The  user  has  the  right  to  access  the  content  of  his  personal  data,  to  correct  them,  to  request  the
cessation  of  data  processing  and  to  object  to  the  processing  of  data  in  cases  indicated  by  law.  Any
correspondence relating  to the processing  of personal  data shall  be directed  to the address: Metal Fach  Jacek
Kucharewicz, 16-

100 Sokółka, 66 Sikorskiego St. Providing personal data is voluntary. Pursuant to the Personal

Data Protection Act of 29 August 1997 (consolidated text: Journal of Laws 2014, item 1182), we inform you that
the personal data provided in this form will be protected against unauthorised access.

«
...
56
57
58
59
60
...
»

Содержание SEG BIO

































































Отзывы:

Нет отзывов