#
Push in the catch spring of lamp housing
1
with a suitable object, e.g. a screwdriver, and
pry off lamp housing
1
.
#
Turn socket
2
counter-clockwise and pull it
out of lamp housing
1
.
#
Pull bulb
3
out of socket
2
.
#
Push new bulb
3
into socket
2
.
#
Screw socket
2
into the lamp housing
1
by
turning it clockwise.
#
Place lamp housing
1
in position on the left
and engage it.
Signal and ambient lamp in the tailgate
#
Push in the catch spring of the lamp housing
on the side of transparent lens
2
with a suit‐
able object, e.g. a screwdriver, and pry off the
lamp housing.
#
Turn socket
3
counter-clockwise and pull it
out of the lamp housing.
#
Pull the bulb out of socket
3
.
#
Push the new bulb into socket
3
.
#
Screw socket
3
into the lamp housing by
turning it clockwise.
#
Place the lamp housing in position at the side
of red lens
1
and engage it.
Windshield wipers
Switching the windshield wipers on and off
Requirements:
R
The power supply has been switched on.
1 g
Windshield wipers off
2
Ä
Intermittent wiping, low
(low rain sensor sensitivity)
3
Å
Intermittent wiping, high
(high rain sensor sensitivity)
4
°
Continuous wiping, slow
5
¯
Continuous wiping, fast
#
Turn the combination switch to the corre‐
sponding position
1
–
5
.
#
Single wiping: push the button on the combi‐
nation switch in the direction of arrow
6
.
#
To wash: push the button on the combination
switch in the direction of arrow
6
as far as
the second point of resistance.
Light and vision 85
