![Mercedes-Benz Metris 2021 Скачать руководство пользователя страница 203](http://html1.mh-extra.com/html/mercedes-benz/metris-2021/metris-2021_operating-instructions-manual_1771777203.webp)
Electrical fuses
Notes on electrical fuses
*
NOTE Electrical fuses
#
Observe the information in the supple‐
ment. You may otherwise fail to recog‐
nize dangers.
The fuse allocation chart and the information on
the fuses can be found in the "Fuse allocation
chart" Supplement.
Vehicle tool kit
Information on the vehicle tool kit
The vehicle tool kit storage location depends on
the equipment version of the vehicle.
The following are examples of storage locations:
R
In the seat base of the left front seat
R
In the rear storage compartment
R
In the tool holder in the cargo compartment
Apart from some country-specific variants, vehi‐
cles without a spare wheel are not equipped with
a tire-changing tool.
If your vehicle is equipped with a tire-change tool
kit, you can find it in the vehicle tool kit.
If the vehicle tool kit is stored in the driver's seat
base, you can find the jack in a separate holder
at the rear of the cargo compartment on the
right-hand side (
/
page 203).
Some tools for changing a wheel are specific to
the vehicle. For more information on which tire-
change tools are required and approved for per‐
forming a wheel change on your vehicle, consult
a qualified specialist workshop.
Required tire-change tools may include the fol‐
lowing, for example:
R
Jack
R
Lug wrench
R
Ratchet wrench
%
The jack has a maximum weight of 16.5 lbs
(7.5 kg) depending on the vehicle's equip‐
ment.
You will find the maximum load capacity of
the jack stated on the adhesive label
attached to the jack.
The jack is maintenance-free. If there is a
malfunction, please contact a qualified spe‐
cialist workshop.
Opening and closing the stowage compart‐
ment in the seat base
Storage compartment in the seat base of the left
front seat
#
To open: press catch springs
1
down and
release cover
2
upwards from the seat base.
Cover
2
can be removed by pulling upwards
at an angle from the seat base.
#
Remove the clamping strap and remove the
vehicle tool bag.
%
For vehicles with a tire-change tool kit, the
jack is in a separate holder in the rear right-
hand side of the cargo compartment
(
/
page 203).
#
To close: after stowing the vehicle tool bag,
insert cover
2
below in the seat base and
fold shut.
Catch springs
1
of cover
2
should engage
audibly.
Breakdown assistance 201