![Mercedes-Benz Metris 2021 Скачать руководство пользователя страница 197](http://html1.mh-extra.com/html/mercedes-benz/metris-2021/metris-2021_operating-instructions-manual_1771777197.webp)
Seat base (example: right-hand front seat)
The following description on connecting and
installing the battery uses the example of the
starter battery in the seat base of the right-hand
front seat.
The auxiliary battery is disconnected and
removed in the same way as the starter battery.
The auxiliary battery is located in the seat base of
the left-hand front seat.
#
Switch off all electrical consumers.
#
Switch off the engine and remove the key
from the ignition lock.
#
Open the front right-hand door.
#
Press both catch springs
1
down and
remove cover
2
upwards from the seat
base.
#
Remove cover
2
by pulling upwards at an
angle from the seat base.
Open seat base (example: right-hand front seat)
#
Remove screws
5
from holder
6
.
#
Remove holder
6
.
#
Remove vent hose
4
from the top of the bat‐
tery.
#
Pull the battery out of the seat base until the
negative terminal clamp can be released and
removed.
#
Disconnect the negative terminal clamp from
negative terminal
3
.
#
Remove the negative terminal clamp in such a
way that the battery terminal clamp no longer
touches negative terminal
3
.
Example: starter battery
#
Remove the battery from the seat base and
place it on the door sill as shown. If neces‐
sary, hold the battery by handles
9
.
#
Remove the positive terminal clamp cover
from positive terminal
7
.
#
Remove positive terminal clamp
8
from pos‐
itive terminal
7
.
#
Remove positive terminal clamp
8
in such a
way that the battery clamp no longer touches
positive terminal
7
.
#
Lift the battery out of the door sill by handles
9
.
Connecting and installing the starter battery
&
WARNING Risk of explosion from hydro‐
gen gas igniting
There is a danger of hydrogen gas igniting
when charging the battery if there is a short
circuit or sparks start to form.
#
Make sure that the positive terminal of
the connected battery does not come
into contact with vehicle parts.
#
Never place metal objects or tools on a
battery.
#
The described order of the battery
clamps must be observed when con‐
necting and disconnecting the battery.
#
When giving starting assistance, always
make sure that you only connect battery
terminals with identical polarity.
#
During starting assistance, you must
observe the described order for con‐
necting and disconnecting the jumper
cable.
Breakdown assistance 195