![Mercedes-Benz Metris 2021 Скачать руководство пользователя страница 205](http://html1.mh-extra.com/html/mercedes-benz/metris-2021/metris-2021_operating-instructions-manual_1771777205.webp)
Tool holder in the cargo compartment
Removing the tool and the jack
Tool holder in the cargo compartment on the
right-hand side of the vehicle (example: Cargo
Van)
#
Remove clamping strap
2
.
#
Remove cover
1
of the tool holder.
#
Carefully pull the vehicle tool kit and jack out
of the tool holder.
Storing the tool and the jack
#
Before storing, wind the jack to the fully
closed position and place it so that the hand‐
wheel is facing forwards and the plate is
facing inwards.
#
Place the jack and vehicle tool kit into the
tool holder.
#
Fit the cover
1
of the tool holder.
#
Tighten clamping strap
2
.
Removing the jack from the tool holder
Holder for jack in the cargo compartment on the
right-hand side of the vehicle (for example, Cargo
Van)
#
Remove clamping strap
1
.
#
Pull jack
2
out of the upper holder and from
lower bracket
3
.
#
The vehicle tool bag or tire-change tool kit is
in the seat base of the left front seat
(
/
page 201).
Stowing the jack
#
Before stowing, wind the jack as far as it will
go and position it with the handwheel facing
down and the plate facing inwards.
#
Place jack
2
onto lower bracket
3
.
#
Press jack
2
into the upper holder and fas‐
ten clamping strap
1
.
The jack is secured.
Breakdown assistance 203