![Mercedes-Benz Metris 2021 Скачать руководство пользователя страница 232](http://html1.mh-extra.com/html/mercedes-benz/metris-2021/metris-2021_operating-instructions-manual_1771777232.webp)
#
Have the brake fluid renewed at the
specified intervals.
*
NOTE Damage to paint, plastic or rubber
by brake fluid
There is a risk of damage to property if brake
fluid comes into contact with paint, plastic or
rubber.
#
If paint, plastic or rubber comes into
contact with brake fluid, rinse with
water immediately.
Observe the notes on paintwork/matte finish
paintwork care (
/
page 184).
Have the brake fluid renewed every two years at
a qualified specialist workshop.
Only use brake fluid approved by Mercedes-Benz
in accordance with MB-Freigabe or MB-Approval
331.0.
Information on brake fluid is available at the fol‐
lowing locations:
R
In the MB Specifications for operating fluids
331.0
-
At https://bevo.mercedes-benz.com
-
In the BeVo app
R
At a qualified specialist workshop
Coolant
Notes on coolant
Observe the notes on operating fluids
(
/
page 227).
&
WARNING ‑ Risk of fire and injury from
antifreeze
If antifreeze comes into contact with hot com‐
ponent parts in the engine compartment, it
may ignite.
#
Allow the engine to cool down before
adding antifreeze.
#
Make sure that no antifreeze spills out
next to the filler opening.
#
Thoroughly clean off any antifreeze from
component parts before starting the
vehicle.
*
NOTE Damage caused by incorrect cool‐
ant
#
Only add coolant that has been pre‐
mixed with the required antifreeze pro‐
tection.
Information on coolant is available at the follow‐
ing locations:
R
In the MB Specifications for operating fluids
320.1
-
At https://bevo.mercedes-benz.com
-
In the BeVo app
R
At a qualified specialist workshop
*
NOTE Overheating at high outside tem‐
peratures
If an inappropriate coolant is used, the engine
cooling system is not sufficiently protected
against overheating and corrosion at high out‐
side temperatures.
#
Always use coolant approved by
Mercedes-Benz .
#
Observe the instructions in the MB
Specifications for operating fluids320.1.
*
NOTE Paintwork damage due to coolant
#
Do not spill coolant on painted surfa‐
ces.
Have the coolant regularly replaced at a qualified
specialist workshop.
Note the proportion of anti-corrosion agent/anti‐
freeze in the engine cooling system within the fol‐
lowing temperature ranges:
R
At least 50% (antifreeze protection up to
about -35°F (-37°C))
R
Maximum 55% (antifreeze protection up to
-49°F (-45°C))
Coolant capacities
Coolant capacity
Model
Capacity
All models
Approx. 11 US qt
(10.4 l )
230 Technical data