Windscreen wipers
106
u
Continuous wipe, slow
t
Continuous wipe, fast
!
If the windscreen becomes dirty in dry
weather conditions, the windscreen wipers
may be activated inadvertently. This could
then damage the windscreen wiper blades
or scratch the windscreen.
For this reason, you should always switch
off the windscreen wipers in dry weather.
X
Make sure that the key is in position 1 or
2 in the ignition lock.
The various wiper settings can be selected
as follows:
Single wipe
X
Briefly press the combination switch to the
pressure point in the direction of arrow
2
.
Wiping with washer fluid
X
Press the combination switch beyond the
pressure point in the direction of arrow
2
.
Intermittent wipe/rain sensor
X
Depending on the intensity of the rain, turn
the combination switch in the direction of
arrow
1
to position
U
or
V
.
The rain sensor is activated. The appropri-
ate wiping frequency is set automatically
according to the intensity of the rain.
Continuous wipe
X
Depending on the intensity of the rain, turn
the combination switch in the direction of
arrow
1
to position
u
or
t
.
Switching off the windscreen wipers
X
Turn the combination switch to position
M
.
Rear window wiper (Estate)
Combination switch
1
Switch
%
To wipe with washer fluid
&
To switch on intermittent wiping
(
To switch off intermittent wiping
)
To wipe with washer fluid
Intermittent wipe
X
Make sure that the key is in position 1 in
the ignition lock.
X
To switch on: turn switch
1
to position
&
.
X
To switch off: turn switch
1
to position
(
.
Controls
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 106
Dateiname: 6515_3416_02_buchblock.pdf;
preflight
