Memory functions*
94
Calling up a stored setting
G
Risk of accident
Only use the memory function on the
driver’s side when the vehicle is stationary.
You could otherwise be distracted from the
traffic conditions by the steering wheel and
seat moving of their own accord, and cause
an accident.
X
Press and hold the relevant storage posi-
tion switch 1, 2 or 3 until the seat, steering
wheel and mirrors are in the stored posi-
tion.
i
The setting procedure is interrupted as
soon as you release the storage position
switch.
Storing a parking position
To make it easier to park, you can store the
front-passenger side exterior mirror position
in such a way that you can see the rear wheel
on that side as soon as you engage reverse
gear.
You can store a parking position for the exte-
rior mirror on the front-passenger side using
the memory button.
You will find information about using the exte-
rior mirror's parking position in the "Parking
aid" section (
Y
page 92).
1
Exterior mirror on the driver's side
2
Adjustment button
3
Exterior mirror on the front-passenger
side
4
Memory button M
X
Make sure that the vehicle is stationary and
that the key is in position 2 in the ignition
lock.
X
Press button
3
for the exterior mirror on
the front-passenger side.
X
Use button
2
to adjust the exterior mirror
to a position which allows you to see the
rear wheel and the kerb.
X
Press memory button M
4
.
X
Press one of the arrows on adjustment but-
ton
2
within three seconds.
The parking position is stored if the exterior
mirror does not move.
i
If the mirror moves out of position, repeat
the steps. You can adjust the exterior mir-
ror again after storing the setting.
Controls
* optional
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 94
Dateiname: 6515_3416_02_buchblock.pdf;
preflight
