Loading and stowing
200
Folding the rear bench seat back
1
Seat cushion
2
Backrest
X
Swing backrest
2
back until it engages.
X
Swing seat cushion
1
back.
X
Push down on seat cushion
1
at the front
and in the middle until it engages.
X
Fold up and adjust the head restraints if
necessary (
Y
page 81).
G
Risk of injury
Make sure that the rear seat backrest and
the seat cushions are fully locked in place.
Removing the seat cushions
You can achieve a larger loading area by
removing the rear bench seat cushions.
X
Make sure that the seat cushions are folded
forward (
Y
page 198).
1
Release catch
2
Connector for seat heating*
!
On vehicles with rear seat heating*, the
electrical contact on the bottom of the
cushion must be disconnected before
removing the seat cushion.
X
Press the connection together on the upper
part of the lengthways side and pull out
seat heating connector
2
from the seat
cushion.
i
When refitting the seat cushion, join the
connections for the seat heating, making
sure the connector engages.
X
Pull seat cushion release catch
1
and
remove the seat cushion upwards.
!
Leave the seat cushion hinge in this posi-
tion. If you fold it back, you could damage
the upholstery.
X
Fold backrest forward (
Y
page 198).
Controls
* optional
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 200
Dateiname: 6515_3416_02_buchblock.pdf;
preflight