On-board computer
127
The engine oil temperature gauge flashes if
the engine oil temperature has not reached
80 †. Avoid driving at full engine output dur-
ing this time.
Displaying the on-board voltage
X
Press the
è
or
·
button to select the
AMG menu.
X
Press the
j
button repeatedly until the
on-board voltage appears.
1
Gear indicator
2
On-board voltage
RACETIMER
The RACETIMER allows time measurements
to be saved.
While you have the RACETIMER displayed,
you will not be able to adjust the volume using
the
æ
and
ç
buttons.
X
Press the
è
or
·
button to select the
AMG menu.
X
Press the
j
button repeatedly until the
RACETIMER appears.
1
Gear indicator
2
RACETIMER
3
Lap
You can start the RACETIMER when the
engine is running or if the key is in position
2 in the ignition lock.
X
To start: press the
æ
button to start the
RACETIMER.
X
To display the intermediate time: press
the
ç
button to show the intermediate
time.
The intermediate time is displayed for five
seconds.
X
To stop: press the
æ
button to stop the
RACETIMER.
The RACETIMER interrupts timing when you
stop the vehicle and turn the key to position
1 in the ignition lock. When you turn the key
to position 2 or 3 and then press the
æ
button, timing is continued.
Storing the lap time and starting a new lap
It is possible to store a maximum of nine laps.
X
Press the
ç
button to show the inter-
mediate time during timing.
The intermediate time is displayed for five
seconds.
X
Press the
ç
button again within 5 sec-
onds.
The displayed intermediate time is stored
as a lap time.
Timing starts for a new lap. The new lap is
timed from when the intermediate time is
called up.
1
Gear indicator
2
RACETIMER
Controls
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 127
Z
Dateiname: 6515_3416_02_buchblock.pdf;
preflight