Loading and stowing
202
!
While loading the vehicle, make sure that
the luggage compartment is not loaded
above the lower edge of the side windows.
Otherwise, the combined luggage cover
and net could be damaged when the tail-
gate is closed.
Do not place objects on the luggage com-
partment cover.
Rolling up the luggage compartment
cover
1
Grab handle
2
Luggage compartment cover
X
Pull luggage cover
2
down to the horizon-
tal by handle
1
.
X
Unhook luggage cover
2
from the retain-
ers on the left and right-hand sides.
To do this, pull luggage compartment cover
2
slightly to the rear and lower it.
X
Release luggage compartment cover
2
.
Luggage compartment cover
2
rolls up of
its own accord.
Pulling out the luggage compartment
cover
X
Pull out luggage compartment cover
2
until it engages.
Removing the combined luggage cover
and net
X
Roll up the safety net and luggage
cover
2
.
X
Fold both rear seat cushions forwards
(
Y
page 198).
X
Fold the right-hand backrest, and then the
left-hand backrest forwards (
Y
page 198).
X
Push the combined luggage cover and net
to the left and out of the retainers on the
rear seat backrest and remove it.
EASY-PACK system*
EASY-PACK load-securing kit*
Your EASY-PACK load-securing kit comes
with accessories which allow you to use your
boot/luggage compartment in a variety of
ways. You can store the load-securing kit in
the wallet provided.
i
Estate: on vehicles with a stowage box*
in the luggage compartment, you can keep
the wallet and the telescopic rod in the
stowage box.
Illustration: Estate
1
Loading rails
Controls
* optional
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 202
Dateiname: 6515_3416_02_buchblock.pdf;
preflight