Loading and stowing
197
X
Open the boot/luggage compartment.
X
Pull the right-hand or left-hand release han-
dle on the backrest.
The corresponding backrest is released
and the head restraints fold back.
X
Fold backrest
2
forwards.
!
Make sure that the head restraints fit fully
in the seat cushion pockets. This prevents
damage to the backrests while loading.
Folding the rear bench seat back
1
Seat cushion
2
Backrest
X
Swing backrest
2
back until it engages.
X
Swing seat cushion
1
back.
X
Push down on seat cushion
1
at the front
and in the middle until it engages.
X
Fold up and adjust the head restraints if
necessary (
Y
page 81).
G
Risk of injury
Make sure that the rear seat backrest and
the seat cushions are fully locked in place.
Removing the seat cushions
You can achieve a larger loading area by
removing the rear bench seat cushions.
X
Make sure that the seat cushions are folded
forward (
Y
page 195) and that the head
restraints are removed (
Y
page 83).
1
Release catch
2
Connector for seat heating*
!
On vehicles with rear seat heating*, the
electrical contact on the bottom of the
cushion must be disconnected before
removing the seat cushion.
X
Press the connection together on the upper
part of the lengthways side and pull out
Controls
* optional
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 197
Z
Dateiname: 6515_3416_02_buchblock.pdf;
preflight