Seat belts
97
Belt warning for driver and front
passenger
The
<
seat belt warning lamp in the instru-
ment cluster reminds you that all occupants
should fasten their seat belts. The
<
seat
belt warning lamp may light up continuously
or it may flash. Additionally, there may be a
warning tone.
The
<
seat belt warning lamp goes out and
the warning tone ceases when the driver and
the front passenger have fastened their seat
belt.
For certain countries only: regardless of
whether the driver or the front passenger is
already secured, the
<
seat belt warning
lamp lights up for six seconds after the engine
has been started. The
<
seat belt warning
lamp then goes out if both the driver and the
front passenger have fastened their seat belt.
i
Further information about the
<
seat
belt warning lamp (
Y
page 290).
Belt height adjustment
You can adjust the seat belt height on the fol-
lowing seats:
R
Driver's seat
R
Front-passenger seat
R
Outer rear seats
Adjust the belt to a height that allows it to be
routed across the middle of your shoulder.
1
Release catch
X
To raise: slide the belt sash guide upwards.
The belt sash guide engages in various posi-
tions.
X
To lower: press and hold release button
1
.
X
Slide the belt sash guide downwards.
X
Let go of release button
1
and make sure
that the belt sash guide has engaged.
Correct driver's seat position
1
Steering wheel
2
Seat belt
3
Seat
Controls
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 97
Z
Dateiname: 6515_3416_02_buchblock.pdf;
preflight