On-board computer
131
Route guidance active
The following may appear in the multi-func-
tion display:
Distronic* menu
You can read the current Distronic settings in
the Distronic menu (
Y
page 145).
i
Menu overview: (
Y
page 124).
Message memory menu
Previous display messages can be called up
in the Message memory menu. You will only
see the Message memory menu if there are
any display messages.
G
Risk of accident
The on-board computer only records and
displays messages and warnings from cer-
tain systems. For this reason, you should
always make sure that your vehicle is safe
to drive. You could otherwise cause an acci-
dent by driving an unsafe vehicle.
Switching off the ignition clears the Message
memory except for the highest priority dis-
play messages. The on-board computer will
delete these display messages only after the
reason for the message has been rectified.
i
Menu overview: see (
Y
page 124).
Displaying messages
Use the buttons on the multi-function steer-
ing wheel.
X
Press the
è
or
·
button repeatedly
until either the original menu or the Mes-
sage memory menu appears.
If the Message memory menu does not
appear, there are no display messages.
If there are messages, the following mes-
sage may appear in the multi-function dis-
play, for example:
2 messages
.
X
Press the
j
or
k
button to call up a
display message.
You can scroll through the display mes-
sages in sequence. The possible display
messages are explained in the "Practical
advice" section (
Y
page 257).
Settings menu
There are two functions in the
Settings...
menu: the
To reset: Press reset button
for 3 seconds
function, which you can use
to reset most settings to the factory settings.
And there are submenus via which you can
make individual settings for your vehicle.
i
Menu overview: see (
Y
page 124).
Use the buttons on the multi-function steer-
ing wheel.
Controls
* optional
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 131
Z
Dateiname: 6515_3416_02_buchblock.pdf;
preflight
