Driving systems
153
1
To store the current speed or a higher
speed
2
LIM indicator lamp
3
To store the current speed or call up the
last stored speed or to make fine adjust-
ments in 1 km/h increments
4
To store the current speed or a lower
speed
5
To switch between cruise control, Dis-
tronic* and variable Speedtronic
6
To deactivate variable Speedtronic
Selecting variable Speedtronic
X
Check whether LIM indicator lamp
2
is on.
If it is on, variable Speedtronic is already
selected.
If it is not, press the cruise control lever in
the direction of arrow
5
.
LIM indicator lamp
2
in the cruise control
lever lights up. Variable Speedtronic is
selected.
G
Risk of accident
If there is a change of drivers, advise the
new driver of the limit speed stored.
Only use Speedtronic if you will not have to
accelerate suddenly to a speed above that
stored as the limit speed. You could other-
wise cause an accident.
You can only exceed the limit speed stored
if you deactivate variable Speedtronic:
R
using the cruise control lever.
R
by depressing the accelerator pedal
beyond the pressure point (kickdown).
It is not possible to deactivate variable
Speedtronic by braking.
Storing the current speed
You can use the cruise control lever to limit
the speed to any speed above 30 km/h while
the engine is running.
X
Briefly press the cruise control lever up
1
or down
4
.
The current speed is stored. The stored
speed, e.g.
LIM km/h
, appears in the multi-
function display.
The segments in the speedometer from the
start of the scale up to the stored speed
light up.
Storing the current speed or calling up
the last stored speed
G
Risk of accident
Only select a stored speed if you know what
that speed is and whether it is suitable for
the current driving and traffic situation.
Otherwise, sudden braking could endanger
you or others.
X
Briefly pull the cruise control lever towards
you
3
.
Controls
* optional
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 153
Z
Dateiname: 6515_3416_02_buchblock.pdf;
preflight