Flat tyre
326
1
Wheel bolts for all wheels supplied by the
factory
X
Clean the wheel and wheel hub contact
surfaces.
X
Place the "Minispare"/collapsible emer-
gency spare wheel* or the spare wheel
onto the centring pin and push it on.
X
Tighten the wheel bolts until they are fin-
ger-tight.
X
Unscrew the centring pin.
X
Tighten the last wheel bolt until it is finger-
tight.
Inflating the collapsible emergency
spare wheel* with the electric air pump
G
Risk of accident
Pump up the collapsible emergency spare
wheel before lowering the vehicle, as you
could otherwise damage the wheel rim.
The electric air pump is located in the stow-
age well under the boot/luggage compart-
ment floor.
X
Take the electric air pump out of the stow-
age well under the boot/luggage compart-
ment floor.
1
Flap
2
On/off switch
3
Electric connector with cable
4
Air pump hose with pressure gauge and
pressure release screw
5
Union nut
X
Open flap
1
.
X
Pull connector
3
and air hose
4
out of
the housing.
X
Make sure that the pressure release screw
on the pressure gauge is closed.
X
Remove the cap from the valve on the tyre.
Practical advice
* optional
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 326
Dateiname: 6515_3416_02_buchblock.pdf;
preflight