Mercedes-Benz 230 1978, Руководство пользователя

Страница: 67 / 91

Electrical System
>
Replacing Bulbs
To remove, push the bulb in and
turn to the left, then lift the bulb out.
To install, grip the bulb with a
paper tissue or sim ilar cloth, align
the pins on the base of the bulb
w ith the grooves in the bulb socket,
push in lightly and turn to the right
until the stop is felt.
Install only bulbs of prescribed
wattage. Refer to “ Technical Data
and last page” .
Headlight Aiming
C orrect headlight aiming is of para­
m ount importance to the road­
w orthiness of the car. Check and
readjust headlights at regular inter­
vals and invariably when a lamp
has been replaced.
Front Lights
(Sealed Beam Version — USA
S pecifications, Fog Light)
1 Cover. Remove cover (1) after
backing out knurled plastic
nuts located behind headlights.
2 Sealed-beam unit fo r high and
low beam
3 Fog light
4 Turn signal, clearance (stand­
ing) and side marker light
5 Securing nuts fo r cover
6 Securing nuts fo r turn signal,
clearance (standing) and side
m arker light
7 Vertical aiming screw,
sealed-beam unit
8 Horizontal aiming screw,
sealed-beam unit
9 V ertical aim ing screw,
fog light
10 Horizontal aiming screw,
fog light
66