Mercedes-Benz 230 1978, Руководство пользователя

Страница: 64 / 91

Checking Fuels Coolants Lubricants etc.
280 E, 280 CE 230
Engine Oil Level Check
Check engine oil level at regular
intervals, e. g. after refueling, with
the engine at operating tem perature
and shut off.
1 Dipstick
2 Pour in engine oil
The vehicle should be parked on
level ground and the oil level must
be somewhere between the lower
and the upper mark on dipstick (1);
do not replenish in excess of the
upper mark.
For viscosity and capacity, see
“ Fuels, Coolants, Lubricants, etc.,
and last page” .
Replenishing Coolant
Open the radiator cap only if the
coolant tem perature is below
194° F (90° C). First turn cap to
notch num ber I to relieve excess
pressure. If opened immediately,
hot coolant and vapour w ould be
ejected.
Pour cold w ater into a hot engine
only if it is running. Both hot and
cold engines can be filled up with
hot water.
The coolant level must reach:
• to m arking 1 if the coolant
is cold,
• to m arking 2 if the coolant
is hot.
The drain plugs are on the RH side
of the engine and LH bottom
m ount of the radiator.
For antifreeze brands, refer to
“ Fuels, Coolants, Lubricants, e tc.” .
(
63