Mercedes-Benz 230 1978, Руководство пользователя

Страница: 62 / 91

Wheels Tires Changing Wheels
Observe wheel bolts!
Changing Wheels
1. Depress parking brake pedal.
2. Move selector lever to position
" p . ,
3. Safeguard vehicle against rolling
off by using chocks o r similar.
Place chocks under both
opposite wheels (on dow nhill
side), on a level road on both
sides of the opposite fron t wheel
when changing a rear wheel.
4. Insert the com bination w rench
in one of the trim ring slots and
pry off the hub cap.
5. Using the com bination wrench,
loosen but do not yet remove the
wheel bolts.
6. Clean ja c k supporting tube, if
necessary. (Jack tubes are be­
hind the fron t wheel housings
and in fro n t of the rear wheel
housings.)
7. Insert ja c k arm into the tube hole
up to the stop. Position the
ja c k so that it w ill always be
vertical as seen from the side,
8
.
For light alloy rims only
For steel rims only
10
.
even on inclines. Jack up the
vehicle until the wheel is clear
of the ground.
Then back out the wheel bolts.
Protect bolt threads from d irt
and sand. Remove the wheel.
A djust the ja c k to allow the
wheel to be slipped on w ithout
being lifted.
Slip on wheel (valve down) and
press onto the hub plate. Screw
in wheel bolts but use only such
bolts that suit the particular
rim.
4
61