Capacities
The following values refer to an oil change
including the oil filter.
Type of vehicle
Replacement
amount with oil fil-
ter
S 350 4MATIC
7.0 l
S 300
53
S 350
S 350 CDI BlueEF-
FICIENCY
S 350 CDI BlueEF-
FICIENCY (Bel-
gium)
S 350 CDI 4MATIC
8.0 l
S 450
S 450 4MATIC
S 500
S 500 4MATIC
8.5 l
S 63 AMG
54
8.75 l (9.35 l
55
)
S 600
S 65 AMG
9.0 l
S 450 CDI
10.5 l
Coolant
The coolant is a mixture of water and anti-
freeze/corrosion inhibitor. It performs the
following tasks:
R
anti-corrosion protection
R
antifreeze protection
R
raising the boiling point
i
When the vehicle is first delivered, it is
topped up with a coolant that will ensure
adequate antifreeze and corrosion protec-
tion.
!
Only top up with coolant that has been
premixed with the desired antifreeze pro-
tection. You could otherwise damage the
engine.
Further information on coolants and on fill-
ing can be found in the Mercedes-Benz
Specifications for Service Products, Sheet
310.1, or at any Mercedes-Benz Service
Centre.
!
Always use a suitable coolant mixture,
even in countries where high temperatures
prevail.
Otherwise, the cooling system will not be
sufficiently protected from corrosion, and
the boiling point will be too low.
If antifreeze/corrosion inhibitor is present in
the correct concentration, the boiling point of
the coolant will be around 130 †.
The antifreeze/corrosion inhibitor concentra-
tion in the cooling system should:
R
be at least 50%. This will protect the cooling
system against freezing down to around
-37 †.
R
not exceed 55% (antifreeze protection
down to -45 †); otherwise, heat will not be
effectively dissipated.
53
Only for certain countries.
54
Engine with external oil cooler.
55
Replacement amount with oil filter including external oil cooler.
428
Service products and capacities
Technica
ldata
221_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7
2009-02-27T14:56:10+01:00 - Seite 428
Dateiname: 6515231002_buchblock.pdf; erzeugt am 03. Mar 2009 15:18:55; WK