i
When you adjust the multicontour seat,
you may hear the air being pumped in or
released.
You can adjust the following air cushions:
R
seat side bolsters
R
seat backrest side bolsters
R
backrest curvature in the lumbar region
R
backrest curvature in the upper back
region
X
Make sure that the key is in position 2 in
the ignition lock.
X
Press the
T
function button.
Selecting the seat
You must first select the seat for which you
wish to make adjustments.
X
Press the
T
function button.
The main area is active.
X
To move to the lower menu bar: slide
Z
V
Æ
.
X
To select a seat: slide
X
V
Y
or turn
c
V
d
.
X
To confirm your selection: press
W
.
Exiting the menu
There are several ways of exiting the menu for
the multicontour seat:
X
Press the
T
function button again.
or
X
Press any function button.
or
X
Select another main function from the
basic menu.
Display values
Two values are displayed on the setting scale
if you adjust the multicontour seat:
R
Red: this is the set value which you specify
when making the adjustment.
R
White: this is the current actual value,
which is slowly brought into line with the
set value.
Adjusting the seat side bolsters
This function allows you to adjust the air
cushions in the seat side bolsters.
X
Select the seat (
Y
page 184).
X
To select
Seat sides
: slide
X
V
Y
or turn
c
V
d
.
X
To confirm your selection: press
W
.
A scale appears.
X
Slide
Z
V
Æ
or turn
c
V
d
until the desired
setting is reached.
X
To save the setting: press
W
.
Adjusting the seat backrest side bol-
sters
This function allows you to adjust the air
cushions in the seat backrest side bolsters.
184
Seats
COMAN
D
221_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7
2009-02-27T14:56:10+01:00 - Seite 184
Dateiname: 6515231002_buchblock.pdf; erzeugt am 03. Mar 2009 15:17:30; WK
