i
Condensation may collect on the under-
side of the vehicle when the cooler is oper-
ating.
X
Open the air-conditioning main menu via
the air-conditioning function bar.
X
To switch on: select
Æ
and press
W
.
X
To switch off: select
Æ
and press
W
.
A tick appears.
Controlling the air conditioning cen-
trally
You can use the
Mono
function to set all the
air-conditioning zones in the vehicle to the
same settings. If the
Mono
function is
switched on and you adjust the air condition-
ing on the driver’s side, these changes will
also be made in all the air-conditioning zones.
X
Open the air-conditioning main menu via
the air-conditioning function bar.
X
Select
Mono
and press
W
.
A tick appears when the function is selec-
ted.
The
Mono
function is automatically switched
off if you:
R
change settings for the automatic air-con-
ditioning system on the front-passenger
side using COMAND.
R
press a rocker switch to operate the auto-
matic air-conditioning system on the front-
passenger side.
R
press one of the rocker switches on the
rear-compartment control panel*.
Adjusting the footwell temperature
You can use the
Footwell temperature
function to set the temperature difference
between the footwell and the rest of the vehi-
cle interior.
i
This setting is quite effective in automatic
mode, especially at low outside tempera-
tures.
The greater the value you set, the higher the
temperature in the footwell.
X
Open the air-conditioning main menu via
the air-conditioning function bar.
X
Select
Footwell temperature
and press
W
.
A scale appears.
X
To change the temperature difference:
slide
Z
V
Æ
or turn
c
V
d
.
X
To confirm your selection: press
W
.
180
Automatic air conditioning
COM
AN
D
* optional
221_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7
2009-02-27T14:56:10+01:00 - Seite 180
Dateiname: 6515231002_buchblock.pdf; erzeugt am 03. Mar 2009 15:17:28; WK