The following functions affect both screens:
R
changing playback options
R
selecting a track
R
using the play, pause and stop functions
R
scanning or skipping forwards and back
R
calling up the DVD menu and navigating
within it
R
setting the language, subtitles and camera
angle
R
calling up interactive DVD content
The following functions affect only one
screen:
R
adjusting audio, video and screen settings
R
switching between full-screen, the menu
system and the navigation menu
TV mode*
The same TV channel is shown on all screens.
If the channel is changed on one of the rear
screens or on COMAND, it will be changed on
all screens.
Switching between main functions
When you exit a main function, the current
setting is stored. If you call up this main func-
tion again later, there are two possibilities:
R
The main function is already running on the
other screen.
R
The main function is not running on the
other screen.
In the first case, the main function appears as
it is already on the other screen.
In the second case, the setting appears on the
screen as it was when you last exited the main
function.
Loading and removing CD/DVDs
When you load or eject a CD/DVD, this is
only displayed on the screen where the main
function
Disc
is selected. The current set-
tings memory is reset to the original state for
both screens.
Simultaneous use of COMAND and the
Rear Seat Entertainment System*
Transferring audio output from the Rear
Seat Entertainment System to the front
passenger
You can switch the audio output from the CD/
DVD drive in the Rear Seat Entertainment
System* to the front passenger's head-
phones. The volume is adjusted on the head-
phones. If the "Disc" main function is running
on one of the rear screens, the audio output
is transmitted to COMAND. If the "Disc" main
function is not running on either of the rear
screens, no audio output is transmitted to
COMAND.
X
Select
Active source from rear
in
COMAND.
Transferring audio output from COMAND
to the Rear Seat Entertainment System
X
Select
Audio
Q
Rear
in COMAND.
X
Switch to COMAND in the rear compart-
ment.
Video DVD functions
Automatic picture shutoff
The picture automatically switches off on the
driver's side if the vehicle is travelling faster
than approximately 6 km/h when in video
DVD mode. The following message appears
in the display:
As soon as the vehicle speed drops below
about 3 km/h, the picture switches back on
again.
Notes about handling DVDs
There may be playback problems when play-
ing copied discs. There are a large variety of
discs, DVD authoring software, disc writing
Video DVD functions
91
COMAND
* optional
221_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7
2009-02-27T14:56:10+01:00 - Seite 91
Z
Dateiname: 6515231002_buchblock.pdf; erzeugt am 03. Mar 2009 15:17:03; WK
